Hydrocyclone is widely used in closed circuit grinding operations but it also has many other applications, such as desliming, degritting, and thickening. 3.Platform Container 4.open top container Packaging Professional technical service Professional technical team provide optimum solutions and early stage
Contact UsApr 06, 2019A hydrocyclone is a filter or separator mechanism that uses centrifugal force to separate solids from liquids or even liquids of different consistencies. The hydrocyclone consists of a two part chamber with a inner profile which is cylindrical along its upper section and conical along the lower
Contact UsHydrocyclone. The mixture is injected into the hydrocyclone in such a way as to create the vortex and, depending upon the relative densities of the two phases, the centrifugal acceleration will cause the dispersed phase to move away from or towards the central core of the vortex.
Contact UsCyclones. A cyclone is a device to classify, separate or sort particles in a liquid suspension based on the ratio of their centripetal force to fluid resistance. Heavy components move outward toward the wall of the cylinder where they agglomerate and spiral down the wall to the outlet at the bottom of the vessel.
Contact UsThe Hydrocyclone reviews data on the theoretical, design, and performance aspects of the liquid cyclone, hydraulic cyclone, or hydrocyclone. The book aims to be a source of reference to those who are in industries employing the use and application of the hydrocyclone.
Contact UsHydrocyclone Working Principle. Unlike the rake and spiral classifiers, the overflow of the cyclone is the exit point for the fine material instead of the other way around as it is in the case of the other two. Extending from the overflow discharge into the body, which is the feed entry point of the cyclone, is
Contact UsHeavy components move outward toward the wall of the vessel where they agglomerate and spiral down the wall to the outlet at the bottom of the vessel. Light components move toward the axis of the hydrocyclone where they move up toward the overflow outlet at the top of the vessel.
Contact UsHYDROCYCLONES. These particles or droplets must have a sufficiently different density relative to the medium in order to achieve separation. The flow pattern in a hydrocyclone is cyclonic. This is induced by tangential injection of the liquid into a cylindrical chamber, which causes the development of a vortex.
Contact UsFig. 1 Illustrates the clean liquid overflow at the top, the solids underflow at the bottom, and the feed inlet at the center. Fig. 2 Illustrates the fluted Vortex Finder. All VorSpin Hydrocylones are constructed in Stainless Steel.
Contact Us